The Gabrylly Chair is a high back mesh office chair, model GYB01. It suits desk workers between about 5 ft 5 in and 6 ft 2 in who want a mesh seat and arms that fold out of the way. GABRYLLY lists a 400 lb loading capacity and a 90 to 120 degree tilt lock GABRYLLY.
Gabrylly Chair at a glance
400lb
Weight capacity
90to 120 degrees
Recline
45degrees
Flip-up arms
3years
Warranty
GABRYLLY lists these figures in the product text for model GYB01 on its own site GABRYLLY.
Weight capacity
400 lb
Recline
90 to 120 degrees
Flip-up arms
45 degrees
Warranty
3 years
Model code
GYB01
Chair size with arms
25.6 in W x 22 in D x 45.3 to 54.9 in H
Seat size
20 in W x 19.3 in D
Seat height
18.5 to 22.05 in
Recommended user height
About 5 ft 5 in to 6 ft 2 in
Back and seat
Mesh on both
Support points
Head, back, hips and hands, plus lumbar support
Headrest
3D headrest, 3 ways to adjust
Tilt lock positions
3
Base and wheels
Five-pointed base, PU mute wheels
Assembly
15 to 20 minutes, Allen wrench included
Note
The spec panel on the same GABRYLLY page lists the chair at 46.5 to 57 in high and the seat at 18.9 to 23.7 in. Measure your desk against the larger figure GABRYLLY.
How much weight does the Gabrylly Chair hold?
GABRYLLY lists a loading capacity of 400 lb for this chair GABRYLLY. Its own Product Size graphic repeats the figure as a test standard up to 400 lb GABRYLLY. The GY01 manual asks you to use the chair one person at a time.
How tall is the Gabrylly Chair?
GABRYLLY lists the whole chair, arms included, at 25.6 in wide, 22 in deep and 45.3 to 54.9 in high GABRYLLY. The seat sits 18.5 to 22.05 in off the floor. The seat pan itself is 20 in wide and 19.3 in deep.
What user height is the Gabrylly Chair made for?
GABRYLLY recommends the chair for people of about 5 ft 5 in to 6 ft 2 in GABRYLLY. It asks you to match your own height and weight to the chair before you buy. For the grey version of the same chair, GABRYLLY says it will supply a shorter gas cylinder on request GABRYLLY.
Gabrylly Chair or Gabrylly Chair with Footrest?
GABRYLLY builds the same chair with a pull-out footrest, model GYB01-FT. That version swaps the 90 to 120 degree tilt lock for three fixed angles up to 135 degrees, and adds a steel footrest that extends to 17.8 in GABRYLLY.
→You want to put your feet up: pick the GYB01-FT with its footrest GABRYLLY.
→You are 5 ft 1 in to 5 ft 9 in: pick the GY1108 GABRYLLY.
→You want a padded seat instead of mesh: pick the GYE01 with its 5 in sponge cushion GABRYLLY.
Good to know before you buy
!
GABRYLLY names a user height range for this chair. It recommends 5 ft 5 in to 6 ft 2 in, and asks you to check your height and weight before you order. Call the maker first if you sit outside that range GABRYLLY.
!
The maker's own page carries two sets of measurements. The product text gives 45.3 to 54.9 in of chair height, and the spec panel gives 46.5 to 57 in. Use the larger numbers when you check clearance under a shelf GABRYLLY.
!
Service runs for 3 years and covers chairs bought on Amazon. The GY01 manual states both points. GABRYLLY's Product Issues page lists a 24-month warranty and a 30-day money-back guarantee, so keep your order number to hand GY01 manualGABRYLLY.
!
The chair ships flat and you build it. GABRYLLY puts the time at 15 to 20 minutes with the Allen wrench in the box. Five chair legs are packed inside the mesh seat, so unpack that first GABRYLLYGY01 manual.
!
The manual asks you to check every screw every 3 months. Loose screws on the back are what GABRYLLY names as the cause of a wobbly backrest. Keep the Allen wrench in a drawer GY01 manual.
Before you start
The manual says the chair is for one person at a time, and asks you not to stand on it or use it as a step ladder GY01 manual.
How the Gabrylly Chair compares
Gabrylly Chair vs Gabrylly GY1108
The GY1108 is GABRYLLY's chair for shorter users. GABRYLLY lists it for people 5 ft 1 in to 5 ft 9 in and up to 300 lb, against 5 ft 5 in to 6 ft 2 in and 400 lb here GABRYLLY.
The GY1094 is the model to look at if you move your arms around a lot. GABRYLLY gives it a 3D armrest that rotates 215 degrees, and a 350 lb capacity against 400 lb here GABRYLLY.
Is the Gabrylly Chair built for a full working day?
Yes. GABRYLLY says the high quality mesh resists abrasion and deformation, and that this makes the chair good for sitting 4 to 8 hours GABRYLLY. The chair is sold as a big and tall task chair.
GABRYLLY lists four supporting points: head, back, hips and hands. It adds a lumbar support to those four. Seat height, headrest, backrest and arms all adjust.
How far does the Gabrylly Chair recline?
The backrest tilts from 90 to 120 degrees, and you can sit straight again whenever you want GABRYLLY. The GY01 manual adds that the backrest locks into 3 tilt angles.
A knob under the seat sets how hard the back pushes back. Turn it clockwise to raise the resistance, and counter-clockwise to lower it GY01 manual.
Do the armrests fold up?
Yes. GABRYLLY says folding the armrests up 45 degrees lets you push the chair directly under the desk GABRYLLY. It lists this as a way to free up floor space in a small room.
The arms also move up and down. Press the black button on the side of the arm, then set the height you want GY01 manual.
Mesh back, mesh seat and the wheels
GABRYLLY puts mesh on both the back and the seat, which it says keeps air moving while you sit GABRYLLY. The same page describes the mesh as resistant to abrasion and deformation.
The chair rolls on PU mute wheels on a five-pointed base. GABRYLLY says those wheels do no harm to a wooden floor.
How to set up and use it
Unpack the carton and check every part against the part list in the manual.
Take the 5 chair legs out of the mesh seat, one first and then the other four.
Push the 5 legs into the base core and fix them with the 5 leg screws.
Press the 5 wheels into the leg sockets, drop the gas lift into the base core, then slide the telescoping cover on.
Bolt the mechanism to the mesh seat with the shorter screws, with the front of the mechanism facing the front of the seat.
Bolt the backrest to the mechanism with the long screws. Turn every screw to half depth first, in a diagonal order, then tighten them all fully.
Push the gas lift into the center hole of the mechanism until it seats.
Line up the 2 hidden black pre-installed screws in each armrest with the holes in the backrest, tighten them with the Allen wrench, then clip the armrest covers on.
Take off the headrest cover, fit the headrest to the backrest with its 2 screws, and put the cover back GY01 manual.
Set the seat height: twist the handle, then add or take your weight off the seat.
Set the recline: pull the handle out to unlock, press back, then push the handle in to lock the angle.
Tip
GABRYLLY puts an installation video for the GY01 on its own Solutions page GABRYLLY.
Care and quick fixes from the manual
Keeping the chair tight
Use the chair after every screw is fully tightened.
Find the 2 armrest screws, which may have been set too tight at assembly.
Loosen them a little.
Flip the arm down first if you need to reach those screws again GY01 manual.
How to take the seat off the gas lift
Raise the chair to its highest setting.
Step on the base.
Hold the mesh seat with both hands and shake it free of the gas lift GY01 manual.
Gabrylly Chair FAQ
Does the Gabrylly Chair have a warranty?
Yes. GABRYLLY's product text says every one of its ergonomic office chairs comes with 3 years of warranty, and the GY01 manual puts the maintain service at 3 years from the date of purchase GABRYLLY. The Product Issues page lists a 24-month warranty with a replacement for quality issues GABRYLLY. You activate it under Contact Us, and GABRYLLY says it replies within 24 hours GABRYLLY.
Can the Gabrylly Chair be used on carpet?
GABRYLLY fits PU mute wheels and says they do no harm on a wooden floor GABRYLLY. For carpet, it sells a set of 5 rollerblade casters, 2.5 in across with a 7/16 in by 7/8 in stem, which it says fit the GABRYLLY office mesh chair GABRYLLY.
Does the Gabrylly Chair come apart?
Yes. The manual shows how to shake the mesh seat off the gas lift, and how to drive the gas lift out of the base with a rubber mallet or a pipe wrench GY01 manual.
Does the Gabrylly Chair have a battery?
No. The GY01 part list holds a headrest, telescoping cover, mechanism, 5 legs and base core, 5 wheels, backrest, gas lift, 2 armrests, mesh seat, screws and an Allen wrench GY01 manual. Nothing on that list is electrical.
How do you adjust the headrest?
Three ways. Rotate it up or down by hand, slide it up or down by hand, or press the two buttons on the support bar with your thumbs and lift the whole bar GY01 manual. Release the buttons to lock the bar again.
What do I do if a part is missing or damaged?
Send GABRYLLY your Amazon order number and a photo, and it repairs or replaces the part GY01 manual. The FAQ page says the maker arranges a replacement part within 24 hours of getting the details GABRYLLY.
What if I missed the telescoping cover during assembly?
The manual says the telescoping cover is decorative and has no effect on how the chair works GY01 manual. You can fit it later by taking the seat off the gas lift.
How much is the Gabrylly Chair?
See today's price with the link above.
The verdict
4/4 PASS
No. 059 · GABRYLLY Mesh Office Chair
Long days at the desk in comfort.
The Gabrylly Chair suits a desk worker of about 5 ft 5 in to 6 ft 2 in who wants mesh on the back and the seat. GABRYLLY pairs a 400 lb loading capacity with a 90 to 120 degree tilt lock, arms that fold up 45 degrees, and 3 years of service. Check the height range and the two sets of measurements on GABRYLLY's page before you order.
4/4 PASS
